The "Issues/PRs opened" event was folded into "Added to project", pull
requests can only be closed by workflows, closed projects don't run
workflows, and actions run in a fixed order. The new Permissions
section defines who can manage workflows and that they then act
without further permission checks. Also fix the editor steps, a typo
and the zh-tw page's nonexistent "New Workflow" button.
Assisted-by: Claude Code:claude-opus-5-5
Fix act runner doc typos and errors and simplify some grammar.
Co-authored-by: Peter Ryszkiewicz <[email protected]>
Co-committed-by: Peter Ryszkiewicz <[email protected]>
Original Gitea's repository no longer contains "Environment to INI" document referenced in "Managing Deployments With Environment Variables" section.
This commit fixes the reference by pointing the link to the last commit where needed doc was still present.
Reviewed-on: https://gitea.com/gitea/docs/pulls/315
Reviewed-by: Lunny Xiao <[email protected]>
Co-authored-by: andriibratanin <[email protected]>
Co-committed-by: andriibratanin <[email protected]>
This adds explanations, that were missing regarding Token scopes and the packages feature requiring a token with said scope. Also added a missing explanation, that tokens can be created in the user interface, not just the API. The reason this PR is created was due to misunderstandings around the package feature, that arose during the discussion in https://github.com/go-gitea/gitea/issues/32048 .
This PR aims to clarify the misunderstood points around tokens, scopes and the package feature.
During the creation of this PR bug https://github.com/go-gitea/gitea/issues/32078 was found, the scopes are always reported as `null` during the response of the initial `POST` to create the token.
Co-authored-by: Wladislav ヴラド Artsimovich <[email protected]>
Co-authored-by: Lunny Xiao <[email protected]>
Reviewed-on: https://gitea.com/gitea/docs/pulls/72
Reviewed-by: Lunny Xiao <[email protected]>
Co-authored-by: FrostKiwi <[email protected]>
Co-committed-by: FrostKiwi <[email protected]>
The SMTPS protocol uses port 465, not 587. Port 587 is instead used for STARTTLS.
Helps getting administrators stuck in cryptic errors such as:
Failed to send a testing email to "[email protected]": could not initiate SMTP session: tls: first record does not look like a TLS handshake
Reviewed-on: https://gitea.com/gitea/docs/pulls/295
Reviewed-by: Lunny Xiao <[email protected]>
Co-authored-by: kairosys-dev <[email protected]>
Co-committed-by: kairosys-dev <[email protected]>
Fix JSON syntax error in token creation request
The previous JSON was malformed:
{"name":test_token","scopes":[...]}
The value of "name" was missing opening quotes, causing the error:
invalid character 't' looking for beginning of value
Fixed by enclosing the string in double quotes:
{"name":"test_token","scopes":[...]}
Reviewed-on: https://gitea.com/gitea/docs/pulls/269
Reviewed-by: techknowlogick <[email protected]>
Co-authored-by: desysoft <[email protected]>
Co-committed-by: desysoft <[email protected]>
Added instructions on how to download the signature file using wget, and fixed a typo in the wget commands that would have caused the command to fail when copied/pasted.
Reviewed-on: https://gitea.com/gitea/docs/pulls/262
Reviewed-by: Lunny Xiao <[email protected]>
Co-authored-by: kmanwar89 <[email protected]>
Co-committed-by: kmanwar89 <[email protected]>
Documentation for my changes to ssh commit signing in <https://github.com/go-gitea/gitea/pull/34341>.
* Renames "GPG Commit Signatures" to "GPG/SSH Commit Signatures", since the url is called just signing and creating a new page would duplicate a lot
* _"The default option and repository specific signing keys are not supported for ssh keys"_
* the original draft implementation did support this for ssh keys
* this warning should avoid people expecting this gitconfig style things to work for ssh keys, since verifying is disabled in this case (e.g. pre 1.25 undocumented behavior preserved).
Co-authored-by: Lunny Xiao <[email protected]>
Reviewed-on: https://gitea.com/gitea/docs/pulls/241
Reviewed-by: Lunny Xiao <[email protected]>
Co-authored-by: Christopher Homberger <[email protected]>
Co-committed-by: Christopher Homberger <[email protected]>
## Description
Fix step 1 of the [Database Preparation](https://docs.gitea.com/installation/database-prep) docs.
## Changes
When a user modifies the */etc/mysql/my.cnf* config file as instructed in step 1 of the database preparation guide, they get an error message from MySQL when trying to log in as the root user after saving changes.
```shell
mysql: [ERROR] Found option without preceding group in config file /etc/mysql/my.cnf at line 37.
mysql: [ERROR] Fatal error in defaults handling. Program aborted!
```
The solution is to include precede `bind-address` with a group like this.
```ini
[mysqld]
bind-address = 203.0.113.3
```
Reviewed-on: https://gitea.com/gitea/docs/pulls/173
Reviewed-by: Lunny Xiao <[email protected]>
Co-authored-by: b-nagaj <[email protected]>
Co-committed-by: b-nagaj <[email protected]>
I can not understand the old logic:
- download the web page (not the raw data) from GitHub
- replace `AppVer`
- remove the file???
It does nothing.
The correct logic:
- download the raw file from GitHub
- replace `AppVer` and `AppSubUrl`
- move the file to the correct place
As the script is not correct for a long time, added the support for all version since 1.19.
Fix#142
Reviewed-on: https://gitea.com/gitea/docs/pulls/150
Reviewed-by: Lunny Xiao <[email protected]>
Co-authored-by: yp05327 <[email protected]>
Co-committed-by: yp05327 <[email protected]>
On FAQ item: "Push Hook / Webhook / Actions aren't running"
The action suggested in the original answer is not enough to fix the issue when the hooks are not running. For example, when none of the hooks is running, and branches and tags are not in the database, re-running only the update/receive hooks will not have any effect.
This change adds two additional actions: sync branches and tags before running re-running the sync of update/receive hooks.
Also added a comment about filesystems mounted with `no-exec` option.
Co-authored-by: Lunny Xiao <[email protected]>
Reviewed-on: https://gitea.com/gitea/docs/pulls/130
Reviewed-by: Lunny Xiao <[email protected]>
Co-authored-by: vmmello <[email protected]>
Co-committed-by: vmmello <[email protected]>
#### Summary
This pull request adds detailed instructions for configuring ProtonMail's SMTP server in the `email-setup.md` documentation. The new section provides step-by-step guidance on generating SMTP tokens and configuring the `app.ini` file for ProtonMail.
#### Changes
- Added a new section under the "ProtonMail" heading in `email-setup.md`.
- Included instructions for generating SMTP tokens in ProtonMail settings.
- Provided an example configuration for the `app.ini` file to use ProtonMail's SMTP server.
Reviewed-on: https://gitea.com/gitea/docs/pulls/93
Reviewed-by: Lunny Xiao <[email protected]>
Reviewed-by: techknowlogick <[email protected]>
Co-authored-by: talltechy <[email protected]>
Co-committed-by: talltechy <[email protected]>
- Added detailed documentation for `cron.delete_repo_archives` settings.
- Documented configuration options including `ENABLED`, `RUN_AT_START`, `NOTICE_ON_SUCCESS`, and `SCHEDULE`.
- Ensured consistent formatting across cron job documentation.
This update improves clarity on how to configure periodic deletion of repository archives within Gitea.
`man 5 jail.conf`:
CONFIGURATION FILES FORMAT
*.conf files are distributed by Fail2Ban. It is recommended that *.conf files should remain unchanged to ease upgrades. If needed,
customizations should be provided in *.local files. For example, if you would like to enable the [ssh-iptables-ipset] jail specified
in jail.conf, create jail.local containing
Reviewed-on: https://gitea.com/gitea/docs/pulls/14
Reviewed-by: techknowlogick <[email protected]>
Co-authored-by: webracer999 <[email protected]>
Co-committed-by: webracer999 <[email protected]>
- Always use a relative markdown link so that we can jump even if we edit it in local env or read it in code hosting server.
Reviewed-on: https://gitea.com/gitea/docs/pulls/1
`overflow-wrap: anywhere` is a superior alternative to `word-wrap:
break-word` and we were already setting it in the class. I tested a few
cases, all look good.
This PR implemented object storages(LFS/Packages/Attachments and etc.)
for Azure Blob Storage. It depends on azure official golang SDK and can
support both the azure blob storage cloud service and azurite mock
server.
Replace #25458Fix#22527
- [x] CI Tests
- [x] integration test, MSSQL integration tests will now based on
azureblob
- [x] unit test
- [x] CLI Migrate Storage
- [x] Documentation for configuration added
------
TODO (other PRs):
- [ ] Improve performance of `blob download`.
---------
Co-authored-by: yp05327 <[email protected]>
We wanted to be able to use the IAM role provided by the EC2 instance
metadata in order to access S3 via the Minio configuration. To do this,
a new credentials chain is added that will check the following locations
for credentials when an access key is not provided. In priority order,
they are:
1. MINIO_ prefixed environment variables
2. AWS_ prefixed environment variables
3. a minio credentials file
4. an aws credentials file
5. EC2 instance metadata
This PR split the `Board` into two parts. One is the struct has been
renamed to `Column` and the second we have a `Template Type`.
But to make it easier to review, this PR will not change the database
schemas, they are just renames. The database schema changes could be in
future PRs.
---------
Co-authored-by: silverwind <[email protected]>
Co-authored-by: yp05327 <[email protected]>
Backport #31022 by @kemzeb
Syncs up docs associated to actions and deleted branch cleanup i.e. in
custom/app.example.ini and the config cheat sheet.
Co-authored-by: Kemal Zebari <[email protected]>
Backport #31003 by wxiaoguang
Fix#31002
1. Mention Make sure `Host` and `X-Fowarded-Proto` headers are correctly passed to Gitea
2. Clarify the basic requirements and move the "general configuration" to the top
3. Add a comment for the "container registry"
4. Use 1.21 behavior if the reverse proxy is not correctly configured
Co-authored-by: wxiaoguang <[email protected]>
Co-authored-by: KN4CK3R <[email protected]>
Fix#31002
1. Mention Make sure `Host` and `X-Fowarded-Proto` headers are correctly passed to Gitea
2. Clarify the basic requirements and move the "general configuration" to the top
3. Add a comment for the "container registry"
4. Use 1.21 behavior if the reverse proxy is not correctly configured
Co-authored-by: KN4CK3R <[email protected]>
Add a configuration item to enable S3 virtual-hosted style (V2) to solve
the problem caused by some S3 service providers not supporting path
style (V1).
Backport #30744 by @lunny
Documentation building has encountered a problem like below. This is
because MDX syntax doesn't allow `{customPath}`, we have to use
\`{customPath}\`
```
Error: Can't render static file for pathname "/next/administration/config-cheat-sheet"
at generateStaticFile (/workspace/gitea/gitea-docusaurus/node_modules/@docusaurus/core/lib/ssg.js:119:15)
at runNextTicks (node:internal/process/task_queues:60:5)
at process.processImmediate (node:internal/timers:449:9)
at async /workspace/gitea/gitea-docusaurus/node_modules/p-map/index.js:57:22 {
[cause]: ReferenceError: CustomPath is not defined
at _createMdxContent (server.bundle.js:4406:106)
at MDXContent (server.bundle.js:10745:8)
at Uc (server.bundle.js:264171:44)
at Xc (server.bundle.js:264173:253)
at Z (server.bundle.js:264179:89)
at Yc (server.bundle.js:264182:98)
at $c (server.bundle.js:264181:140)
at Z (server.bundle.js:264179:345)
at Xc (server.bundle.js:264177:231)
at Z (server.bundle.js:264179:89)
```
Co-authored-by: Lunny Xiao <[email protected]>
Documentation building has encountered a problem like below. This is
because MDX syntax doesn't allow `{customPath}`, we have to use
\`{customPath}\`
```
Error: Can't render static file for pathname "/next/administration/config-cheat-sheet"
at generateStaticFile (/workspace/gitea/gitea-docusaurus/node_modules/@docusaurus/core/lib/ssg.js:119:15)
at runNextTicks (node:internal/process/task_queues:60:5)
at process.processImmediate (node:internal/timers:449:9)
at async /workspace/gitea/gitea-docusaurus/node_modules/p-map/index.js:57:22 {
[cause]: ReferenceError: CustomPath is not defined
at _createMdxContent (server.bundle.js:4406:106)
at MDXContent (server.bundle.js:10745:8)
at Uc (server.bundle.js:264171:44)
at Xc (server.bundle.js:264173:253)
at Z (server.bundle.js:264179:89)
at Yc (server.bundle.js:264182:98)
at $c (server.bundle.js:264181:140)
at Z (server.bundle.js:264179:345)
at Xc (server.bundle.js:264177:231)
at Z (server.bundle.js:264179:89)
```
Misspell 0.5.0 supports passing a csv file to extend the list of
misspellings, so I added some common ones from the codebase. There is at
least one typo in a API response so we need to decided whether to revert
that and then likely remove the dict entry.
Follow #30454
And fix#24957
When using "preferred_username", if no such field,
`extractUserNameFromOAuth2` (old `getUserName`) shouldn't return an
error. All other USERNAME options do not return such error.
And fine tune some logic and error messages, make code more stable and
more friendly to end users.
Added to doc for rootless Docker installation: for SSH passthrough, the
ssh user (git) has to be able to run docker.
---------
Co-authored-by: techknowlogick <[email protected]>
Initial support for #25680
This PR only adds some simple styles from GitHub, it is big enough and
it focuses on adding the necessary framework-level supports. More styles
could be fine-tuned later.
Backport #30555 by xor-gate
Config section `[task]` has been deprecated in favor of `[queue.task]`
Co-authored-by: Jerry Jacobs <[email protected]>
Co-authored-by: wxiaoguang <[email protected]>
This allows you to hide the "Powered by" text in footer via
`SHOW_FOOTER_POWERED_BY` flag in configuration.
---------
Co-authored-by: silverwind <[email protected]>
Backport #29314 by @scribblemaniac
This fixes a minor issue in the documentation for SSH Container
Passthrough for non-rootless installs. The non-rootless Dockerfile and
docker-compose do not set `USER`/`user` instructions so `docker exec`
will run as root by default. While running as root, gitea commands will
refuse to execute, breaking these approaches. For containers built with
the rootless instructions, `docker exec` will run as git by default so
this is not necessary in that case.
This issue was already discussed in #19065, but it does not appear this
part of the issue was ever added to the documentation.
Co-authored-by: scribblemaniac <[email protected]>
This fixes a minor issue in the documentation for SSH Container
Passthrough for non-rootless installs. The non-rootless Dockerfile and
docker-compose do not set `USER`/`user` instructions so `docker exec`
will run as root by default. While running as root, gitea commands will
refuse to execute, breaking these approaches. For containers built with
the rootless instructions, `docker exec` will run as git by default so
this is not necessary in that case.
This issue was already discussed in #19065, but it does not appear this
part of the issue was ever added to the documentation.
## Changes
- Adds setting `EXTERNAL_USER_DISABLE_FEATURES` to disable any supported
user features when login type is not plain
- In general, this is necessary for SSO implementations to avoid
inconsistencies between the external account management and the linked
account
- Adds helper functions to encourage correct use
Enable us to use tailwind's
[`font-family`](https://tailwindcss.com/docs/font-family) classes as
well as remove `gt-mono` in favor of `tw-font-mono`. I also merged the
"compensation" to one selector, previously this was two different values
0.9em and 0.95em. I did not declare a `serif` font because I don't think
there will ever be a use case for those. Command ran:
```sh
perl -p -i -e 's#gt-mono#tw-font-mono#g' web_src/js/**/* templates/**/*
Previously, the default was a week.
As most instances don't set the setting, this leads to a bad user
experience by default.
## ⚠️ Breaking
If your instance requires a high level of security,
you may want to set `[security].LOGIN_REMEMBER_DAYS` so that logins are
not valid as long.
---------
Co-authored-by: Jason Song <[email protected]>
We have to define this one in helpers.css because tailwind only
generates a single class but certain things rely on this being
double-class. Command ran:
```sh
perl -p -i -e 's#gt-hidden#tw-hidden#g' web_src/js/**/* templates/**/* models/**/* web_src/css/**/*
---------
Co-authored-by: wxiaoguang <[email protected]>
- Move some scripts from `build` to new `tools` dir. Eventually i would
like to move all but let's do it step-by-step.
- Add dir to eslint and move the files into vars.
- Update docs accordingly.
- While updating docs I noticed we were incorrectly having `public/img`
path still in a few places. Replace those with the current
`public/assets/img`.
---------
Co-authored-by: Nanguan Lin <[email protected]>
Co-authored-by: Giteabot <[email protected]>
The command order of prepare-docs is incorrect.
We should prepare same version with different locale at once, otherwise the doc files for `zh-cn` in `i18n` folder will be incorrect.
Before: (files in current is as same as version 1.19)

After:

Co-authored-by: Lunny Xiao <[email protected]>
Reviewed-on: https://gitea.com/gitea/gitea-docusaurus/pulls/92
Reviewed-by: Lunny Xiao <[email protected]>
Reviewed-by: silverwind <[email protected]>
Co-authored-by: yp05327 <[email protected]>
Co-committed-by: yp05327 <[email protected]>
* "mail/issue/default.tmpl": the body is rendered by backend
`markdown.RenderString() HTML`, it has been already sanitized
* "repo/settings/webhook/base_list.tmpl": "Description" is prepared by
backend `ctx.Tr`, it doesn't need to be sanitized
Add new option:
`visible`: witch can hide a specific field of the form or the created
content afterwards
It is a string array witch can contain `form` and `content`. If only
`form` is present, it wont show up in the created issue afterwards and
the other way around. By default it sets both except for markdown
As they are optional and github don't have any similar thing, it is non
breaking and also do not conflict with it.
With this you can:
- define "post issue creation" elements like a TODO list to track an
issue state
- make sure to have a checkbox that reminds the user to check for a
thing but dont have it in the created issue afterwards
- define markdown for the created issue (was the downside of using yaml
instead of md in the past)
- ...
## Demo
```yaml
name: New Contribution
description: External Contributor creating a pull
body:
- type: checkboxes
id: extern-todo
visible: [form]
attributes:
label: Contribution Guidelines
options:
- label: I checked there exist no similar feature to be extended
required: true
- label: I did read the CONTRIBUTION.MD
required: true
- type: checkboxes
id: intern-todo
visible: [content]
attributes:
label: Maintainer Check-List
options:
- label: Does this pull follow the KISS principe
- label: Checked if internal bord was notifyed
# ....
```
[Demo
Video](https://cloud.obermui.de/s/tm34fSAbJp9qw9z/download/vid-20240220-152751.mkv)
---
*Sponsored by Kithara Software GmbH*
---------
Co-authored-by: John Olheiser <[email protected]>
Co-authored-by: delvh <[email protected]>
Extract from #20549
This PR added a new option on app.ini `[admin]USER_DISABLED_FEATURES` to
allow the site administrator to disable users visiting deletion user
interface or allow.
This options are also potentially allowed to define more features in
future PRs.
---------
Co-authored-by: wxiaoguang <[email protected]>
- Databases are one of the most important parts of Forgejo, every
interaction uses the database in one way or another. Therefore, it is
important to maintain the database and recognize when the server is not
doing well with the database. There already is the option to log *every*
SQL query along with its execution time, but monitoring becomes
impractical for larger instances and takes up unnecessary storage in the
logs.
- Add a QoL enhancement that allows instance administrators to specify a
threshold value beyond which query execution time is logged as a warning
in the xorm logger. The default value is a conservative five seconds to
avoid this becoming a source of spam in the logs.
- The use case for this patch is that with an instance the size of
Codeberg, monitoring SQL logs is not very fruitful and most of them are
uninteresting. Recently, in the context of persistent deadlock issues
(https://codeberg.org/forgejo/forgejo/issues/220), I have noticed that
certain queries hold locks on tables like comment and issue for several
seconds. This patch helps to identify which queries these are and when
they happen.
- Added unit test.
(cherry picked from commit 9cf501f1af4cd870221cef6af489618785b71186)
---------
Co-authored-by: Gusted <[email protected]>
Co-authored-by: Giteabot <[email protected]>
Co-authored-by: 6543 <[email protected]>
For some user (as me), documentation lack of precision about where to
store issue/pr template.
I propose an enhancement about this point. With bold exergue and
precision about server itself.
I've found some user with same interrogation as :
https://forum.gitea.com/t/issue-template-directory/3328
---------
Co-authored-by: Km <[email protected]>
Co-authored-by: Lunny Xiao <[email protected]>
For some user (as me), documentation lack of precision about where to
store issue/pr template.
I propose an enhancement about this point. With bold exergue and
precision about server itself.
I've found some user with same interrogation as :
https://forum.gitea.com/t/issue-template-directory/3328
---------
Co-authored-by: 6543 <[email protected]>
Co-authored-by: Lunny Xiao <[email protected]>
Add more details for the docker tag when using container registry.
---------
Co-authored-by: wxiaoguang <[email protected]>
Co-authored-by: KN4CK3R <[email protected]>
With this option, it is possible to require a linear commit history with
the following benefits over the next best option `Rebase+fast-forward`:
The original commits continue existing, with the original signatures
continuing to stay valid instead of being rewritten, there is no merge
commit, and reverting commits becomes easier.
Closes#24906
Update `docs/content/administration/backup-and-restore.zh-cn.md`
`docs/content/contributing/guidelines-frontend.zh-cn.md`
`docs/content/help/support.zh-cn.md`
`docs/content/installation/database-preparation.zh-cn.md`
`docs/content/installation/windows-service.zh-cn.md`
`docs/content/usage/profile-readme.zh-cn.md` to be consistent with the
English document
- Use maintained fork https://github.com/golangci/misspell
- Rename `mispell-check` to `lint-spell`, add `lint-spell-fix`
- Run `lint-spell` in separate actions step
- Lint more files, fix discovered issues
- Remove inaccurate and outdated info in docs (we do not need GOPATH for
tools anymore)
Maybe later we can add more spellchecking tools, but I have not found
any good ones yet.
This PR adds a new `must-change-password` parameter to the
`change-password` cli command.
We already have the `must-change-password` command but it feels natural
to have this integrated into the `change-password` cli command.
---------
Co-authored-by: 6543 <[email protected]>
Renames it to `ENABLED` to be consistent with other settings and
deprecates it.
I believe this change is necessary because other setting groups such as
`attachment`, `cors`, `mailer`, etc. have an `ENABLED` setting, but
`oauth2` is the only one with an `ENABLE` setting, which could cause
confusion for users.
This is no longer a breaking change because `ENABLE` has been set as
deprecated and as an alias to `ENABLED`.
The previous variables are used by the compiler and aren't too useful
for non-developers. The newly listed variables are more likely to be of
interest.
Apologies for this drive-by PR, I probably missed instructions from the
contributors guide. The patch can be regarded as a simple way to explain
the problem and solution. Feel free to close and possibly create a new
PR that does adhere to the contributors guide.
Sometimes you need to work on a feature which depends on another (unmerged) feature.
In this case, you may create a PR based on that feature instead of the main branch.
Currently, such PRs will be closed without the possibility to reopen in case the parent feature is merged and its branch is deleted.
Automatic target branch change make life a lot easier in such cases.
Github and Bitbucket behave in such way.
Example:
$PR_1$: main <- feature1
$PR_2$: feature1 <- feature2
Currently, merging $PR_1$ and deleting its branch leads to $PR_2$ being closed without the possibility to reopen.
This is both annoying and loses the review history when you open a new PR.
With this change, $PR_2$ will change its target branch to main ($PR_2$: main <- feature2) after $PR_1$ has been merged and its branch has been deleted.
This behavior is enabled by default but can be disabled.
For security reasons, this target branch change will not be executed when merging PRs targeting another repo.
Fixes#27062Fixes#18408
---------
Co-authored-by: Denys Konovalov <[email protected]>
Co-authored-by: delvh <[email protected]>
This PR adds a section to the documentation that links to the project
[Opengist](https://github.com/thomiceli/opengist) on GitHub.
The feature was proposed in #16670 but didn't resonate well with the
maintainers.
Mainly for MySQL/MSSQL.
It is important for Gitea to use case-sensitive database charset
collation. If the database is using a case-insensitive collation, Gitea
will show startup error/warning messages, and show the errors/warnings
on the admin panel's Self-Check page.
Make `gitea doctor convert` work for MySQL to convert the collations of
database & tables & columns.
* Fix#28131
## ⚠️ BREAKING ⚠️
It is not quite breaking, but it's highly recommended to convert the
database&table&column to a consistent and case-sensitive collation.
Backport #28639 by @denyskon
According to [Debian
docs](https://wiki.debian.org/DebianRepository/UseThirdParty):
> The certificate MUST NOT be placed in /etc/apt/trusted.gpg.d or loaded
by apt-key add.
> ...
> If future updates to the certificate will be managed by an apt/dpkg
package as recommended below, then it SHOULD be downloaded into
/usr/share/keyrings using the same filename that will be provided by the
package. If it will be managed locally , it SHOULD be downloaded into
/etc/apt/keyrings instead.
> ...
> A sources.list entry SHOULD have the signed-by option set.
Co-authored-by: Denys Konovalov <[email protected]>
According to [Debian
docs](https://wiki.debian.org/DebianRepository/UseThirdParty):
> The certificate MUST NOT be placed in /etc/apt/trusted.gpg.d or loaded
by apt-key add.
> ...
> If future updates to the certificate will be managed by an apt/dpkg
package as recommended below, then it SHOULD be downloaded into
/usr/share/keyrings using the same filename that will be provided by the
package. If it will be managed locally , it SHOULD be downloaded into
/etc/apt/keyrings instead.
> ...
> A sources.list entry SHOULD have the signed-by option set.
Backport #28626 by @hakito
Make it clear that this value is just a default value and that every
artifact can have it's own value.
Co-authored-by: Gerd Katzenbeisser <[email protected]>
Backport #28587, the only conflict is the test file.
The CORS code has been unmaintained for long time, and the behavior is
not correct.
This PR tries to improve it. The key point is written as comment in
code. And add more tests.
Fix#28515Fix#27642Fix#17098
The CORS code has been unmaintained for long time, and the behavior is
not correct.
This PR tries to improve it. The key point is written as comment in
code. And add more tests.
Fix#28515Fix#27642Fix#17098
Update more actions to use nodejs20 runtime and also update the docs for
checkout action usage.
similar to:
- #27836
- #27096
---------
Signed-off-by: Rui Chen <[email protected]>
Nowadays, cache will be used on almost everywhere of Gitea and it cannot
be disabled, otherwise some features will become unaviable.
Then I think we can just remove the option for cache enable. That means
cache cannot be disabled.
But of course, we can still use cache configuration to set how should
Gitea use the cache.
Several fields in the "Verify group membership in LDAP" docs were
confusingly titled when compared to the actual fields in the
application, this change rectifies that by matching the docs to the
fields already present in gitea.
Signed-off-by: David Hulick <[email protected]>
Close#28287
## How to test it in local
convert Makefile L34 into:
```
cd .tmp/upstream-docs && git clean -f && git reset --hard && git fetch origin pull/28302/head:pr28302 && git switch pr28302
```
https://gitea.com/gitea/gitea-docusaurus/actions/runs/661/jobs/0#jobstep-9-39
I noticed that there are many warning logs in building docs.
It is causing 404 in docs.gitea.com now, so we need to fix it.
And there are also some other problems in v1.19 which can not be done in
this PR.
ps: Are there any good methods to test this in local?
Follow #28191
There are some misadded docs in #24914's backport PR #25016.
The following package registries are all supported in 1.20, so we should
not have docs in v1.19
- Alpine (#23714)
- CRAN (#22343)
- Debain (#24426)
- Go (#24687)
- RPM (#23380)
Backport #28160 by @yp05327
Since #27054, Actions are enabled by default. so we should also edit the
document. 😃
ps: I think this should be backport to 1.21.0.
Co-authored-by: yp05327 <[email protected]>
These are some things I changed to make local development easier, especially when having to update multiple versions of docs at once like the docusaurus v3 update.
i.e.
```makefile
GITEA_REMOTE := ~/code/code.gitea.io/gitea
GITEA_LATEST_BRANCH := docs-v3
GITEA_VERSION_BRANCH_PREFIX := docs-v3-
...
```
to run the Makefile against my local repo.
Reviewed-on: https://gitea.com/gitea/gitea-docusaurus/pulls/89
Co-authored-by: jolheiser <[email protected]>
Co-committed-by: jolheiser <[email protected]>
This patchset changes the connection string builder to use net.URL and
the host/port parser to use the stdlib function for splitting host from
port. It also adds a footnote about a potentially required portnumber
for postgres UNIX sockets.
Fixes: #24552
Closes#27455
> The mechanism responsible for long-term authentication (the 'remember
me' cookie) uses a weak construction technique. It will hash the user's
hashed password and the rands value; it will then call the secure cookie
code, which will encrypt the user's name with the computed hash. If one
were able to dump the database, they could extract those two values to
rebuild that cookie and impersonate a user. That vulnerability exists
from the date the dump was obtained until a user changed their password.
>
> To fix this security issue, the cookie could be created and verified
using a different technique such as the one explained at
https://paragonie.com/blog/2015/04/secure-authentication-php-with-long-term-persistence#secure-remember-me-cookies.
The PR removes the now obsolete setting `COOKIE_USERNAME`.
Duplicate headers in a single Markdown document are problemlematic
because the auto-generated links won't be stable. Enable this rule with
no exceptions which is also the default of `markdownlint`. For example:
```md
# A
## Example
# B
## Example
```
Docasaurus will generated `example` and `example-1` links for this. If
the first heading is altered, the link `example` will unexpectedly move
to the second example heading.
Ref: https://github.com/go-gitea/gitea/pull/27461#discussion_r1347987659
Part of https://github.com/go-gitea/gitea/issues/27097:
- `gitea` theme is renamed to `gitea-light`
- `arc-green` theme is renamed to `gitea-dark`
- `auto` theme is renamed to `gitea-auto`
I put both themes in separate CSS files, removing all colors from the
base CSS. Existing users will be migrated to the new theme names. The
dark theme recolor will follow in a separate PR.
## ⚠️ BREAKING ⚠️
1. If there are existing custom themes with the names `gitea-light` or
`gitea-dark`, rename them before this upgrade and update the `theme`
column in the `user` table for each affected user.
2. The theme in `<html>` has moved from `class="theme-name"` to
`data-theme="name"`, existing customizations that depend on should be
updated.
---------
Co-authored-by: Lunny Xiao <[email protected]>
Co-authored-by: Giteabot <[email protected]>
- MySQL 5.7 support and testing is dropped
- MySQL tests now execute against 8.1, up from 5.7 and 8.0
- PostgreSQL 10 and 11 support ist dropped
- PostgreSQL tests now execute against 16, up from 15
- MSSQL 2008 support is dropped
- MSSQL tests now run against locked 2022 version
Fixes: https://github.com/go-gitea/gitea/issues/25657
Ref: https://endoflife.date/mysql
Ref: https://endoflife.date/postgresql
Ref: https://endoflife.date/mssqlserver
## ⚠️ BREAKING ⚠️
Support for MySQL 5.7, PostgreSQL 10 and 11, and MSSQL 2008 is dropped.
You are encouraged to upgrade to supported versions.
---------
Co-authored-by: techknowlogick <[email protected]>
With this PR we added the possibility to configure the Actions timeouts
values for killing tasks/jobs.
Particularly this enhancement is closely related to the `act_runner`
configuration reported below:
```
# The timeout for a job to be finished.
# Please note that the Gitea instance also has a timeout (3h by default) for the job.
# So the job could be stopped by the Gitea instance if it's timeout is shorter than this.
timeout: 3h
```
---
Setting the corresponding key in the INI configuration file, it is
possible to let jobs run for more than 3 hours.
Signed-off-by: Francesco Antognazza <[email protected]>
Previously, the production build never output sourcemaps. Now we emit
one file for `index.js` because it is the most likely one where we need
to be able to better debug reported issues like
https://github.com/go-gitea/gitea/issues/27213. This will currently
increase the binary size of gitea by around 700kB which is what the
gzipped source map file has.
Also, I fixed the CSS sourcemap generation which was broken since the
introduction of lightningcss.
Backport #27126 by @Zettat123
Related to #27039
The `ref` property in Gitea Actions is different from GitHub Actions.
This PR improves the documentation to explain the difference.
Co-authored-by: Zettat123 <[email protected]>
Backport #26999
If the AppURL(ROOT_URL) is an HTTPS URL, then the COOKIE_SECURE's
default value should be true.
And, if a user visits an "http" site with "https" AppURL, they won't be
able to login, and they should have been warned. The only problem is
that the "language" can't be set either in such case, while I think it
is not a serious problem, and it could be fixed easily if needed.
Backport #26883
This change was caused by #26271, for configuration as below:
```
[attachment]
ENABLE = true
PATH = data/attachments
MAX_SIZE = 100
MAX_FILES = 5
```
Before #26271, the resolved path is ${AppWorkPath}/${attachments.PATH}
(such as `/var/lib/gitea/data/attachments`)
After #26271, the resolved path is ${AppDataPath}/${attachments.PATH}
(such as `/var/lib/gitea/data/data/attachments`)
Fix https://github.com/go-gitea/gitea/issues/26864 Follow
https://github.com/go-gitea/gitea/pull/26271
Backport #26382 by @jolheiser
This PR adds our matrix space to the support options and alphabetizes
the list.
I also considered adding our Mastodon, however that isn't as suitable as
the other options because it's just whoever has access to the account vs
a community chat/forum.
Signed-off-by: jolheiser <[email protected]>
Co-authored-by: John Olheiser <[email protected]>
Backport #26690 by @thomas-mc-work
… because it doesn't require a separate shell, spawning a process which
cost unnecessary resources and takes time.
Co-authored-by: Thomas McWork <[email protected]>
Backport #26654 by @lunny
copy and modified from #14572
> Whilst debating enforcing MFA within our team, I realised there isn't
a lot of context to the side effects of enabling it. Most of us use Git
over HTTP and would need to add a token.
I plan to add another PR that adds a sentence to the UI about needing to
generate a token when enabling MFA if HTTP is to be used.
Co-authored-by: Lunny Xiao <[email protected]>
Co-authored-by: techknowlogick <[email protected]>
Co-authored-by: silverwind <[email protected]>
Backport #26267 by @wxiaoguang
1. Fix the wrong document (add the missing `MODE=`)
2. Add a more friendly log message to tell users to add `MODE=` in their
config
Co-authored-by: wxiaoguang <[email protected]>
Closes#30Closes#31Closes#42
Rather than partially cloning, instead we clone once and then `clean` (to remove generated files), `reset` (to reset changed files), and `checkout` branches as needed. This should allow the outdated translation check to continue to work while also reducing build times significantly.
Before:

After:

Reviewed-on: https://gitea.com/gitea/gitea-docusaurus/pulls/52
Co-authored-by: John Olheiser <[email protected]>
Co-committed-by: John Olheiser <[email protected]>
Backport #26068 by @felixvictor
The setting `MAILER_TYPE` is deprecated.
According to the config cheat sheet, it should be `PROTOCOL`.
Co-authored-by: Felix Victor <[email protected]>
Co-authored-by: Lunny Xiao <[email protected]>
Backport #26096 by @thigg
related #1635#18159
This will probably be obsolete at some point, but it should not break
anything and it may help some users
Co-authored-by: thigg <[email protected]>
Close#46
Same as those in [blog](https://gitea.com/gitea/blog/pulls/272), but for docs and api
Ejected DocPage (unsafe to eject) and ApiDoc (safe to eject) for layout changes

Screenshots

Co-authored-by: techknowlogick <[email protected]>
Co-authored-by: techknowlogick <[email protected]>
Reviewed-on: https://gitea.com/gitea/gitea-docusaurus/pulls/47
Co-authored-by: HesterG <[email protected]>
Co-committed-by: HesterG <[email protected]>
- Do not use `target="_blank"`for gitea websites on navbar (same behavior as about.gitea.com)
- Translate "blog" on navbar for zh-cn
Before:

After:

Reviewed-on: https://gitea.com/gitea/gitea-docusaurus/pulls/44
Co-authored-by: HesterG <[email protected]>
Co-committed-by: HesterG <[email protected]>
Backport #25648
Replace #25580Fix#19453
The problem was: when users set "GITEA__XXX__YYY" , the "install page"
doesn't respect it.
So, to make the result consistent and avoid surprising end users, now
the "install page" also writes the environment variables to the config
file.
And, to make things clear, there are enough messages on the UI to tell
users what will happen.
There are some necessary/related changes to `environment-to-ini.go`:
* The "--clear" flag is removed and it was incorrectly written there.
The "clear" operation should be done if INSTALL_LOCK=true
* The "--prefix" flag is removed because it's never used, never
documented and it only causes inconsistent behavior.
The only conflict during backport is "ui divider" in
templates/install.tmpl
Backport #25771 by @leavesster
---
according `docker/rootless/usr/local/bin/docker-setup.sh` , in rootless
docker setup, ssh port is 2222.
and mysql database case should port same as PostgreSQL port
Co-authored-by: leavesster <[email protected]>
- Used custom api dropdown for changing label dynamically. Used method discussed in [this post](https://github.com/facebook/docusaurus/pull/7231). `ComponentTypes` is ejected safely.

- Fixed dropdowns missing on chrome docs page

- Fixed `:has` selector compatibility problem on firefox. After (Screenshots from firefox):




Reviewed-on: https://gitea.com/gitea/gitea-docusaurus/pulls/39
Co-authored-by: HesterG <[email protected]>
Co-committed-by: HesterG <[email protected]>
# Changes
- Added [redocusaurus](https://github.com/rohit-gohri/redocusaurus) package to display swagger api with reference to [woodpecker](https://github.com/woodpecker-ci/woodpecker/tree/master/docs)
- Change `sed` for swagger.json for proper version and baseurl.
- Add a dropdown for different api versions. (screenshot below)
- On API pages, only API version dropdown will show(hide locale dropdown, version dropdown for doc, and doc search)
- Allow build CSR API pages for development so it saves building time.
# Screenshots




Search:

Reviewed-on: https://gitea.com/gitea/gitea-docusaurus/pulls/32
Co-authored-by: HesterG <[email protected]>
Co-committed-by: HesterG <[email protected]>
Backport #25581 by @wolfogre
Resolve#24789
## ⚠️ BREAKING ⚠️
Before this, `DEFAULT_ACTIONS_URL` cound be set to any custom URLs like
`https://gitea.com` or `http://your-git-server,https://gitea.com`, and
the default value was `https://gitea.com`.
But now, `DEFAULT_ACTIONS_URL` supports only
`github`(`https://github.com`) or `self`(the root url of current Gitea
instance), and the default value is `github`.
If it has configured with a URL, an error log will be displayed and it
will fallback to `github`.
Actually, what we really want to do is always make it
`https://github.com`, however, this may not be acceptable for some
instances of internal use, so there's extra support for `self`, but no
more, even `https://gitea.com`.
Please note that `uses: https://xxx/yyy/zzz` always works and it does
exactly what it is supposed to do.
Although it's breaking, I belive it should be backported to `v1.20` due
to some security issues.
Follow-up on the runner side:
- https://gitea.com/gitea/act_runner/pulls/262
- https://gitea.com/gitea/act/pulls/70
Co-authored-by: Jason Song <[email protected]>
Close#4
Right now on MacOS, sed will produce backup files, because on Mac, If do something like below using bash script
```
$SED_INPLACE '1s/---/---\nisOutdated: true/' $file
```
It will become the following on executed, and a backup file will be produced:
```
sed -i ''\'''\''' '1s/---/---\nisOutdated: true/' ./docs/content/doc/help/faq.zh-cn.md
```
The way to fix this in this PR is to change the `SED_INPLACE` to a function. [Reference](https://github.com/pingcap/tipb/blob/aa19c2d12587e66b31069f790fc371b6be565504/generate-cpp.sh#L4) (Tested on my
Mac and backup files with suffix '' will not be produced after changing to function)
Reviewed-on: https://gitea.com/gitea/gitea-docusaurus/pulls/36
Reviewed-by: Lunny Xiao <[email protected]>
Co-authored-by: HesterG <[email protected]>
Co-committed-by: HesterG <[email protected]>
Backport #25256 by @thezzisu
In this pull request, the following changes are addressed:
- State user should create `config.yaml` before start container to avoid
errors.
- Provided instructions to deploy runners using docker compose.
Co-authored-by: Zisu Zhang <[email protected]>
Modified `loop_docs.sh` to take `version` and `locale` and params so do not need other `loop_docs*` scripts.
Need confirmation with version information for 1.20 and latest.
Like version in `static/20-swagger.json` and `static/latest-swagger.json`, and version used to replace `{{< version >}}`
Will wait for a stable version for 1.20

Reviewed-on: https://gitea.com/gitea/gitea-docusaurus/pulls/28
Reviewed-by: Lunny Xiao <[email protected]>
Co-authored-by: HesterG <[email protected]>
Co-committed-by: HesterG <[email protected]>
Backport #23911 by @lunny
Follow up #22405Fix#20703
This PR rewrites storage configuration read sequences with some breaks
and tests. It becomes more strict than before and also fixed some
inherit problems.
- Move storage's MinioConfig struct into setting, so after the
configuration loading, the values will be stored into the struct but not
still on some section.
- All storages configurations should be stored on one section,
configuration items cannot be overrided by multiple sections. The
prioioty of configuration is `[attachment]` > `[storage.attachments]` |
`[storage.customized]` > `[storage]` > `default`
- For extra override configuration items, currently are `SERVE_DIRECT`,
`MINIO_BASE_PATH`, `MINIO_BUCKET`, which could be configured in another
section. The prioioty of the override configuration is `[attachment]` >
`[storage.attachments]` > `default`.
- Add more tests for storages configurations.
- Update the storage documentations.
Co-authored-by: Lunny Xiao <[email protected]>
Co-authored-by: wxiaoguang <[email protected]>
Close#17
mdxa is another component that is safe to eject

And right now some links are using `master` as the branch(link will be redirect to `main`), so checked for that as well.
Update:
Change `master` to `main` in upstream, so also removed check for `master`
https://github.com/go-gitea/gitea/pull/25126
# After
For example:




Reviewed-on: https://gitea.com/gitea/gitea-docusaurus/pulls/27
Reviewed-by: Lunny Xiao <[email protected]>
Co-authored-by: HesterG <[email protected]>
Co-committed-by: HesterG <[email protected]>
- `git log` needs all commit history to compare latest commit of files, so changed `git clone --depth=1` to `git clone`. This will make the step take longer, so might be improved if there is a better way.
- `src/theme/MDXContent/index.js` is from [ejecting of the component](https://docusaurus.io/docs/swizzling#ejecting) inside `@docusaurus/theme-classic` plugin, and this one is safe to eject according to docusaurus


- [Outdated component style reference](https://mui.com/material-ui/react-alert/)
- Added [`Translate` component](https://docusaurus.io/docs/next/docusaurus-core#translate) to `Outdated` so it can be localized. [reference](https://docusaurus.io/docs/next/i18n/tutorial#translate-your-react-code)
- One way to check for the specific outdated documents:
search for `lastest commit timestamp` in [prepare nightly docs and prepare 1.19 docs steps](https://gitea.com/gitea/gitea-docusaurus/actions/runs/74)
# After
The Chinese documents that are outdated (latest commit is ealier than laster commit of English version):



Reviewed-on: https://gitea.com/gitea/gitea-docusaurus/pulls/25
Reviewed-by: Lunny Xiao <[email protected]>
Co-authored-by: HesterG <[email protected]>
Co-committed-by: HesterG <[email protected]>
Backport #24925, partially backport #24934
(`docs/content/doc/help/faq.zh-cn.md` file)
Part of backport has already done by #24942
Also backport #24881 to avoid "deadlock"
---------
Co-authored-by: Zettat123 <[email protected]>
Backport #24979
Changes:
1. Use uniform links types relative to doc folder (start with `doc/`)
2. According to [docusaurus
links](https://docusaurus.io/docs/markdown-features/links), if `<a>` is
used, the `href` is resolved as URL location, but not file location. So
need to use `[text]({{< relref "path" >}})` instead.
# Main changes and Some notices
- Chines Docs should be put into corresponding versions' folders under `i18n/zh-cn/docusaurus-plugin-content-docs`. See [translate-markdown-files](https://docusaurus.io/docs/i18n/tutorial#translate-markdown-files) for reference. And also [srs-docs](https://github.com/ossrs/srs-docs) is a project that can be used as a reference. So changed the related paths in `loop_docs*` scripts.
- The markdown files under `docs/<version>` and `i18n/zh-cn/docusaurus-plugin-content-docs/<version>` must have the same name to be referred as translated. Files inside docs are corresponding to `current` version.
For example, `docs/administration/mail-templates.md` and `i18n/zh-cn/docusaurus-plugin-content-docs/current/administration/mail-templates.md`. Filename of `mail-templates.md` must be the same (cannot be `mail-templates.zh-cn.md` and `mail-templates.us-en.md`)
So trim the `.en-us.md` and `.zh-cn.md` to `.md` to ensure the same names inside `loop_docs*` scripts.
- Used `npx docusaurus write-translations --locale zh-cn` to do sidebar, footer, and header translations, so no need to keep `sideBarCN` anymore. [reference](https://docusaurus.io/docs/cli#docusaurus-write-translations-sitedir)
- Local Tests for `en` and `zh-cn` are separeted, run the following on local respectly to test them
```bash
# test en version
npm run start
# test zh-cn version
npm run start -- --locale zh-cn
```
- If wants to test `en` and `zh-cn` both at the same time, run build and serve
```
npm run build
npm run serve
```
- Added some indexed page, for example:


Reviewed-on: https://gitea.com/gitea/gitea-docusaurus/pulls/13
Co-authored-by: HesterG <[email protected]>
Co-committed-by: HesterG <[email protected]>
Backport #23923 by @teauxfu
updated the example config to make the needed backticks around the
password more obvious
Co-authored-by: alex <[email protected]>
Backport #23733 by @wolfogre
I neglected that the `NameKey` of `Unit` is not only for translation,
but also configuration. So it should be `repo.actions` to maintain
consistency.
## ⚠️ BREAKING ⚠️
If users already use `actions.actions` in `DISABLED_REPO_UNITS` or
`DEFAULT_REPO_UNITS`, it will be treated as an invalid unit key.
Co-authored-by: Jason Song <[email protected]>
Follow #21962
After I eat my own dogfood, I would say that
ONLY_SHOW_RELEVANT_REPOS=false is necessary for many private/enterprise
instances, because many private repositories do not have
"description/topic", users just want to search by their names.
This PR also adds `PageIsExploreRepositories` check, to make code more
strict, because the `search` template is shared for different purpose.
And during the test, I found a bug that the "Search" button didn't
respect the "relevant" parameter, so this PR fixes the bug by the way
together.
Backport #23580 by @silverwind
Updated this default to GitHub's latest, adding the `.patch` file
extension to allowed types.
Co-authored-by: silverwind <[email protected]>
Backport #23430 by @brechtvl
* Fix scoped label left and right part breaking across lines.
* Remove slanted divider in scoped label display, make it straight.
After using this for a while, this feels more visually noisy than
helpful.
* Reduce contrast between scope and item to reduce probability of
unreadable text on background.
* Change documentation to remove mention of non-exclusive scoped labels.
Co-authored-by: Brecht Van Lommel <[email protected]>
Co-authored-by: Lunny Xiao <[email protected]>
Co-authored-by: John Olheiser <[email protected]>
Backport #22451 by @philip-peterson
This PR adds support for reflogs on all repositories. It does this by
adding a global configuration entry.
Implements #14865
Signed-off-by: Philip Peterson <[email protected]>
Co-authored-by: Philip Peterson <[email protected]>
Backport #23087
Whitespace was missing from refactoring docs metadata.
backport label applied so it is included in versioned docs.
Co-authored-by: techknowlogick <[email protected]>
* Keine "Amtsdeusch"-Umschreibungen, einfach so als ob man den Nutzer direkt persönlich ansprechen würde
Genauer definiert:
* "falsch" anstatt "nicht korrekt/inkorrekt"
* Benutzerkonto oder Konto? Oder Account?
* "Wende dich an ..." anstatt "kontaktiere ..."
* In der selben Zeit übersetzen (sonst wird aus "is" "war")
* Richtige Anführungszeichen verwenden. Also `"` statt `''` oder `'` oder \` oder `´`
*`„` für beginnende Anführungszeichen, `“` für schließende Anführungszeichen
Es gelten Artikel und Worttrennungen aus dem Duden.
## Formulierungen in Modals und Buttons
Es sollten die gleichen Formulierungen auf Buttons und Modals verwendet werden.
Beispiel: Wenn der Button mit `löschen` beschriftet ist, sollte im Modal die Frage lauten `Willst du das wirklich löschen?` und nicht `Willst du das wirklich entfernen?`. Gleiches gilt für Success/Errormeldungen nach der Aktion.
Some jurisdictions (such as EU), requires certain legal pages (e.g. Privacy Policy) to be added to website. Follow these steps to add them to your Gitea instance.
## Getting Pages
Gitea source code ships with sample pages, available in `contrib/legal` directory. Copy them to `custom/public/assets/`. For example, to add Privacy Policy:
Now you need to edit the page to meet your requirements. In particular you must change the email addresses, web addresses and references to "Your Gitea Instance" to match your situation.
You absolutely must not place a general ToS or privacy statement that implies that the Gitea project is responsible for your server.
## Make it Visible
Create or append to `/path/to/custom/templates/custom/extra_links_footer.tmpl`:
**Note**: PAM support is added via [build-time flags](installation/install-from-source.md#build),
**Note**: PAM support is added via [build-time flags](installation/from-source.md#build),
and the official binaries provided do not have this enabled. PAM requires that
and the official binaries provided do not have this enabled. PAM requires that
the necessary libpam dynamic library be available and the necessary PAM
the necessary libpam dynamic library be available and the necessary PAM
development headers be accessible to the compiler.
development headers be accessible to the compiler.
@@ -236,7 +227,7 @@ configure this, set the fields below:
- Restrict what domains can log in if using a public SMTP host or SMTP host
- Restrict what domains can log in if using a public SMTP host or SMTP host
with multiple domains.
with multiple domains.
- Example: `gitea.io,mydomain.com,mydomain2.com`
- Example: `gitea.com,mydomain.com,mydomain2.com`
- Force SMTPS
- Force SMTPS
@@ -348,4 +339,13 @@ If set `ENABLE_REVERSE_PROXY_FULL_NAME=true`, a user full name expected in `X-WE
You can also limit the reverse proxy's IP address range with `REVERSE_PROXY_TRUSTED_PROXIES` which default value is `127.0.0.0/8,::1/128`. By `REVERSE_PROXY_LIMIT`, you can limit trusted proxies level.
You can also limit the reverse proxy's IP address range with `REVERSE_PROXY_TRUSTED_PROXIES` which default value is `127.0.0.0/8,::1/128`. By `REVERSE_PROXY_LIMIT`, you can limit trusted proxies level.
Notice: Reverse Proxy Auth doesn't support the API. You still need an access token or basic auth to make API requests.
You can enable the this authentication method for the API with
```ini
[service]
ENABLE_REVERSE_PROXY_AUTHENTICATION_API = true
```
:::note
When this method is enabled for the API, the reverse proxy is responsible for handling CSRF protection.
Gitea currently has a `dump` command that will save the installation to a ZIP file. This
file can be unpacked and used to restore an instance.
## Backup Consistency
To ensure the consistency of the Gitea instance, it must be shutdown during backup.
Gitea consists of a database, files and git repositories, all of which change when it is used. For instance, when a migration is in progress, a transaction is created in the database while the git repository is being copied over. If the backup happens in the middle of the migration, the git repository may be incomplete although the database claims otherwise because it was dumped afterwards. The only way to avoid such race conditions is by stopping the Gitea instance during the backups.
## Backup Command (`dump`)
Switch to the user running Gitea: `su git`. Run `./gitea dump -c /path/to/app.ini` in the Gitea installation
directory. There should be some output similar to the following:
```log
2016/12/27 22:32:09 Creating tmp work dir: /tmp/gitea-dump-417443001
2016/12/27 22:32:09 Dumping local repositories.../home/git/repositories
2016/12/27 22:32:22 Dumping database...
2016/12/27 22:32:22 Packing dump files...
2016/12/27 22:32:34 Removing tmp work dir: /tmp/gitea-dump-417443001
2016/12/27 22:32:34 Finish dumping in file gitea-dump-1482906742.zip
```
Inside the `gitea-dump-1482906742.zip` file, will be the following:
-`app.ini` - Optional copy of configuration file if originally stored outside the default `custom/` directory
-`custom/` - All config or customization files in `custom/`.
-`data/` - Data directory (APP_DATA_PATH), except sessions if you are using file session. This directory includes `attachments`, `avatars`, `lfs`, `indexers`, SQLite file if you are using SQLite.
-`repos/` - Complete copy of the repository directory.
-`gitea-db.sql` - SQL dump of database
-`log/` - Various logs. They are not needed for a recovery or migration.
Intermediate backup files are created in a temporary directory specified either with the
`--tempdir` command-line parameter or the `TMPDIR` environment variable.
## Backup the database
The SQL dump created by `gitea dump` uses XORM and Gitea admins may prefer to use the native the MySQL and PostgreSQL dump tools instead. There are still open issues when using XORM for dumping the database that may cause problems when attempting to restore it.
There are a few caveats for using the `dump` command with Docker.
The command has to be executed with the `RUN_USER = <OS_USERNAME>` specified in `gitea/conf/app.ini`; and, for the zipping of the backup folder to occur without permission error the command `docker exec` must be executed inside of the `--tempdir`.
\*Note: `--tempdir` refers to the temporary directory of the docker environment used by Gitea; if you have not specified a custom `--tempdir`, then Gitea uses `/tmp` or the `TMPDIR` environment variable of the docker container. For `--tempdir` adjust your `docker exec` command options accordingly.
The result should be a file, stored in the `--tempdir` specified, along the lines of: `gitea-dump-1482906742.zip`
## Restore Command (`restore`)
There is currently no support for a recovery command. It is a manual process that mostly
involves moving files to their correct locations and restoring a database dump.
mysql --default-character-set=utf8mb4 -u$USER -p$PASS$DATABASE <gitea-db.sql
# sqlite3
sqlite3 $DATABASE_PATH <gitea-db.sql
# postgres
psql -U $USER -d $DATABASE < gitea-db.sql
service gitea restart
```
Repository Git Hooks should be regenerated if installation method is changed (eg. binary -> Docker), or if Gitea is installed to a different directory than the previous installation.
With Gitea running, and from the directory Gitea's binary is located, execute: `./gitea admin regenerate hooks`
This ensures that application and configuration file paths in repository Git Hooks are consistent and applicable to the current installation. If these paths are not updated, repository `push` actions will fail.
If you still have issues, consider running `./gitea doctor check` to inspect possible errors (or run with `--fix`).
### Using Docker (`restore`)
There is also no support for a recovery command in a Docker-based gitea instance. The restore process contains the same steps as described in the previous section but with different paths.
The `gitea dump` command can produce a SQL file that can be read by another database type, which is useful to convert the database to another in case you did not choose the correct one during the first installation.
Note that this conversion process is not well-tested, which is why it is recommended to choose the final database type during the first installation without attempting to change it afterwards.
Stop the Gitea server, then make sure you have a full backup of your original database.
Before attempting the conversion, ensure that the original database is clean. Run `gitea doctor check --all --fix` and `gitea doctor recreate-table` to address common issues.
Use the `--database` flag to get a Gitea dump with the SQL file in the target format, in this example PostgreSQL: `gitea dump --database postgres`, then extract the file `gitea-db.sql` from the generated ZIP file.
Create the PostgreSQL Gitea user and Gitea database. Then, import the SQL file as the Gitea user into the Gitea database, using commands such as:
```sh
sudo -u postgres psql -d gitea
gitea=# SET synchronous_commit TO off
gitea=# SET on_error_stop TO on
gitea=# \i gitea-db.sql
```
Disabling `synchronous_commit` makes PostgreSQL less resilient to crashes, but makes the import a lot faster. Since we already have a backup of the original database and we can check that the import completes successfully, it should be a good trade-off.
After the import is completed, set up Gitea to use PostgreSQL and start the Gitea server again. Good luck!
Gitea has mailer functionality for sending transactional emails (such as registration confirmation). It can be configured to either use Sendmail (or compatible MTAs like Postfix and msmtp) or directly use SMTP server.
:::note
Be sure to set ENABLE_NOTIFY_MAIL=true to allow Gitea to send email notifications. Check the [Config Cheat Sheet](../administration/config-cheat-sheet.md#service-service) for details.
:::
## Using Sendmail
Use `sendmail` command as mailer.
:::note
For use in the official Gitea Docker image, please configure with the SMTP version (see the following section).
:::
:::note
For Internet-facing sites consult documentation of your MTA for instructions to send emails over TLS. Also set up SPF, DMARC, and DKIM DNS records to make emails sent be accepted as legitimate by various email providers.
:::
```ini title="app.ini"
[mailer]
ENABLED = true
FROM = gitea@mydomain.com
PROTOCOL = sendmail
SENDMAIL_PATH = /usr/sbin/sendmail
SENDMAIL_ARGS = "--" ; most "sendmail" programs take options, "--" will prevent an email address being interpreted as an option.
```
## Using SMTP
Directly use SMTP server as relay. This option is useful if you don't want to set up MTA on your instance but you have an account at email provider.
```ini title="app.ini"
[mailer]
ENABLED = true
FROM = gitea@mydomain.com
PROTOCOL = smtps
SMTP_ADDR = mail.mydomain.com
SMTP_PORT = 465
USER = gitea@mydomain.com
PASSWD = `password`
```
Restart Gitea for the configuration changes to take effect.
To send a test email to validate the settings, go to Gitea > Site Administration > Configuration > Summary -> Mailer Configuration.
For the full list of options check the [Config Cheat Sheet](../administration/config-cheat-sheet.md)
:::note
Authentication is only supported when the SMTP server communication is encrypted with TLS or `HOST=localhost`. TLS encryption can be through:
:::
- STARTTLS (also known as Opportunistic TLS) via port 587 with `PROTOCOL=smtp+starttls`. Initial connection is done over cleartext, but then be upgraded over TLS if the server supports it.
- SMTPS connection (SMTP over TLS) via the default port 465. Connection to the server use TLS from the beginning.
- Forced SMTPS connection with `PROTOCOL=smtps`. (These are both known as Implicit TLS.)
This is due to protections imposed by the Go internal libraries against STRIPTLS attacks.
Note that Implicit TLS is recommended by [RFC8314](https://tools.ietf.org/html/rfc8314#section-3) since 2018.
### Gmail
The following configuration should work with GMail's SMTP server:
```ini title="app.ini"
[mailer]
ENABLED = true
HOST = smtp.gmail.com:465 ; Remove this line for Gitea >= 1.18.0
SMTP_ADDR = smtp.gmail.com
SMTP_PORT = 465
FROM = example.user@gmail.com
USER = example.user
PASSWD = `***`
PROTOCOL = smtps
```
Note that you'll need to create and use an [App password](https://support.google.com/accounts/answer/185833?hl=en) by enabling 2FA on your Google
account. You won't be able to use your Google account password directly.
### ProtonMail
This feature is currently only available for select Proton for Business customers and those with Visionary and Family plans with custom domain addresses. See [ProtonMail's SMTP documentation](https://proton.me/support/smtp-submission) for more information. This limitation can be circumvented by using the ProtonMail Bridge application.
Note that emails sent using SMTP are not [end-to-end encrypted](https://proton.me/support/proton-mail-encryption-explained). However, they’re still stored with zero-access encryption like any other emails in your Proton Mail inbox.
The following configuration should work with ProtonMail's SMTP server:
1. In your browser (or desktop application), sign in to your Proton Mail account and select **Settings → All settings → Proton Mail → IMAP/SMTP → SMTP tokens**.
2. Click **Generate token**.
3. Enter the following details to create a new SMTP token:
- **Token name**: Select a name for your token. This is for your reference only and does not affect the token's functionality.
- **Email address**: Select one of your active custom domain addresses to pair with your token. Copy this email address and use it for the `FROM` and `USER` configuration in `app.ini`.
4. Click **Generate**.
5. Enter your Proton Mail Account password.
Your SMTP username and SMTP token (password) will be generated. You can now enter them as the `USER` and `PASSWD` in your `app.ini` configuration.
```ini title="app.ini"
[mailer]
ENABLED = true
FROM = example.user@customdomain.tld
PROTOCOL = smtp+starttls
SMTP_ADDR = smtp.protonmail.ch
SMTP_PORT = 587
USER = example.user@customdomain.tld
PASSWD = `TOKEN`
```
After closing the popup, you will not be able to see this SMTP token (password) again for security reasons. You can always generate more tokens if you need to rotate passwords.
Note: Your Proton Mail login or mailbox passwords will not work with SMTP
This supports rendering of whole files. If you want to render code blocks in markdown you would need to do something with javascript. See some examples on the [Customizing Gitea](administration/customizing-gitea.md) page.
This supports rendering of whole files. If you want to render code blocks in markdown you would need to do something with javascript. See some examples on the [Customizing Gitea](../administration/customizing-gitea.md) page.
## Installing external binaries
## Installing external binaries
@@ -32,18 +23,16 @@ In order to get file rendering through external binaries, their associated packa
If you're using a Docker image, your `Dockerfile` should contain something along this lines:
If you're using a Docker image, your `Dockerfile` should contain something along this lines:
**Remember that fail2ban is powerful and can cause lots of issues if you do it incorrectly, so make
sure to test this before relying on it so you don't lock yourself out.**
Gitea returns an HTTP 200 for bad logins in the web logs, but if you have logging options on in
`app.ini`, then you should be able to go off of `log/gitea.log`, which gives you something like this
on a bad authentication from the web or CLI using SSH or HTTP respectively:
```log
2018/04/26 18:15:54 [I] Failed authentication attempt for user from xxx.xxx.xxx.xxx
```
```log
2020/10/15 16:05:09 modules/ssh/ssh.go:143:publicKeyHandler() [W] Failed authentication attempt from xxx.xxx.xxx.xxx
```
(DEPRECATED: This may be a false positive as the user may still go on to correctly authenticate.)
```log
2020/10/15 16:05:09 modules/ssh/ssh.go:155:publicKeyHandler() [W] Failed authentication attempt from xxx.xxx.xxx.xxx
```
(DEPRECATED: This may be a false positive as the user may still go on to correctly authenticate.)
```log
2020/10/15 16:05:09 modules/ssh/ssh.go:198:publicKeyHandler() [W] Failed authentication attempt from xxx.xxx.xxx.xxx
```
(DEPRECATED: This may be a false positive as the user may still go on to correctly authenticate.)
```log
2020/10/15 16:05:09 modules/ssh/ssh.go:213:publicKeyHandler() [W] Failed authentication attempt from xxx.xxx.xxx.xxx
```
(DEPRECATED: This may be a false positive as the user may still go on to correctly authenticate.)
```log
2020/10/15 16:05:09 modules/ssh/ssh.go:227:publicKeyHandler() [W] Failed authentication attempt from xxx.xxx.xxx.xxx
```
(DEPRECATED: This may be a false positive as the user may still go on to correctly authenticate.)
```log
2020/10/15 16:05:09 modules/ssh/ssh.go:249:sshConnectionFailed() [W] Failed authentication attempt from xxx.xxx.xxx.xxx
```
(From 1.15 this new message will available and doesn't have any of the false positive results that above messages from publicKeyHandler do. This will only be logged if the user has completely failed authentication.)
```log
2020/10/15 16:08:44 ...s/context/context.go:204:HandleText() [E] invalid credentials from xxx.xxx.xxx.xxx
```
Add our filter in `/etc/fail2ban/filter.d/gitea.local`:
```ini
# gitea.local
[Definition]
failregex = .*(Failed authentication attempt|invalid credentials|Attempted access of unknown user).* from <HOST>
ignoreregex =
```
Add our jail in `/etc/fail2ban/jail.d/gitea.local`:
```ini
[gitea]
enabled = true
filter = gitea
logpath = /var/lib/gitea/log/gitea.log
maxretry = 10
findtime = 3600
bantime = 900
action = iptables-allports
```
If you're using Docker, you'll also need to add an additional jail to handle the **FORWARD**
chain in **iptables**. Configure it in `/etc/fail2ban/jail.d/gitea-docker.local`:
```ini
[gitea-docker]
enabled = true
filter = gitea
logpath = /var/lib/gitea/log/gitea.log
maxretry = 10
findtime = 3600
bantime = 900
action = iptables-allports[chain="FORWARD"]
```
Then simply run `service fail2ban restart` to apply your changes. You can check to see if
fail2ban has accepted your configuration using `service fail2ban status`.
Make sure and read up on fail2ban and configure it to your needs, this bans someone
for **15 minutes** (from all ports) when they fail authentication 10 times in an hour.
If you run Gitea behind a reverse proxy with Nginx (for example with Docker), you need to add
this to your Nginx configuration so that IPs don't show up as 127.0.0.1:
```
proxy_set_header X-Real-IP $remote_addr;
```
The security options in `app.ini` need to be adjusted to allow the interpretation of the headers
as well as the list of IP addresses and networks that describe trusted proxy servers
(See the [configuration cheat sheet](../administration/config-cheat-sheet.md#security-security) for more information).
```
REVERSE_PROXY_LIMIT = 1
REVERSE_PROXY_TRUSTED_PROXIES = 127.0.0.1/8 ; 172.17.0.0/16 for the docker default network
Before you enable HTTPS, make sure that you have valid SSL/TLS certificates.
You could use self-generated certificates for evaluation and testing. Please run `gitea cert --host [HOST]` to generate a self signed certificate.
If you are using Apache or nginx on the server, it's recommended to check the [reverse proxy guide](./reverse-proxies.md).
To use Gitea's built-in HTTPS support, you must change your `app.ini` file:
```ini
[server]
PROTOCOL = https
ROOT_URL = https://git.example.com:3000/
HTTP_PORT = 3000
CERT_FILE = cert.pem
KEY_FILE = key.pem
```
Note that if your certificate is signed by a third party certificate authority (i.e. not self-signed), then cert.pem should contain the certificate chain. The server certificate must be the first entry in cert.pem, followed by the intermediaries in order (if any). The root certificate does not have to be included because the connecting client must already have it in order to establish the trust relationship.
To learn more about the config values, please checkout the [Config Cheat Sheet](./config-cheat-sheet.md#server-server).
For the `CERT_FILE` or `KEY_FILE` field, the file path is relative to the `GITEA_CUSTOM` environment variable when it is a relative path. It can be an absolute path as well.
### Setting up HTTP redirection
The Gitea server is only able to listen to one port; to redirect HTTP requests to the HTTPS port, you will need to enable the HTTP redirection service:
```ini
[server]
REDIRECT_OTHER_PORT = true
; Port the redirection service should listen on
PORT_TO_REDIRECT = 3080
```
If you are using Docker, make sure that this port is configured in your `docker-compose.yml` file.
## Using ACME (Default: Let's Encrypt)
[ACME](https://tools.ietf.org/html/rfc8555) is a Certificate Authority standard protocol that allows you to automatically request and renew SSL/TLS certificates. [Let's Encrypt](https://letsencrypt.org/) is a free publicly trusted Certificate Authority server using this standard. Only `HTTP-01` and `TLS-ALPN-01` challenges are implemented. In order for ACME challenges to pass and verify your domain ownership, external traffic to the gitea domain on port `80` (`HTTP-01`) or port `443` (`TLS-ALPN-01`) has to be served by the gitea instance. Setting up [HTTP redirection](#setting-up-http-redirection) and port-forwards might be needed for external traffic to route correctly. Normal traffic to port `80` will otherwise be automatically redirected to HTTPS. **You must consent** to the ACME provider's terms of service (default Let's Encrypt's [terms of service](https://letsencrypt.org/documents/LE-SA-v1.2-November-15-2017.pdf)).
Minimum setup using the default Let's Encrypt:
```ini
[server]
PROTOCOL=https
DOMAIN=git.example.com
ENABLE_ACME=true
ACME_ACCEPTTOS=true
ACME_DIRECTORY=https
;; Email can be omitted here and provided manually at first run, after which it is cached
ACME_EMAIL=email@example.com
```
Minimum setup using a [smallstep CA](https://github.com/smallstep/certificates), refer to [their tutorial](https://smallstep.com/docs/tutorials/acme-challenge) for more information.
Enabling HTTPS only at the proxy level is referred as [TLS Termination Proxy](https://en.wikipedia.org/wiki/TLS_termination_proxy). The proxy server accepts incoming TLS connections, decrypts the contents, and passes the now unencrypted contents to Gitea. This is normally fine as long as both the proxy and Gitea instances are either on the same machine, or on different machines within private network (with the proxy is exposed to outside network). If your Gitea instance is separated from your proxy over a public network, or if you want full end-to-end encryption, you can also [enable HTTPS support directly in Gitea using built-in server](#using-the-built-in-server) and forward the connections over HTTPS instead.
:::
Loaded 50 of 1694 files, more files were not shown because too many files have changed in this diff.
Show more
Reference in new issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.