The Kubernetes backend copies actions and workspaces into job containers with `tar` over `pods/exec`, so every byte goes through the API server. On managed clusters that often sits in other zones than the nodes, so each byte can cross zones twice, and the copies load the API server.
With `kubernetes.transfer.mode: auto` or `direct`, an init container copies `gitea-runner` into the job pod, and the job container fetches directories and copies of 64 KiB or more gzipped from the runner over the pod network. `auto` falls back to the API server for a job pod that cannot reach the runner, `direct` fails the job.
Copies can hold secrets, so each is served once, over TLS 1.3 pinned to a certificate the runner generates, only to the job pod's IPs.
Copying setup-go@v5, cache@v4, setup-java@v4 and build-push-action@v6 sends 11.6 MB through the API server on main and 532 B with this PR.
Co-authored-by: silverwind <[email protected]>
Co-authored-by: silverwind <[email protected]>
Reviewed-on: https://gitea.com/gitea/runner/pulls/1354
Reviewed-by: silverwind <[email protected]>
Co-authored-by: Lunny Xiao <[email protected]>
Three independent fixes, one commit each.
1. Hosts and ports were interpolated directly when building URLs, so a literal IPv6 address produced an unbracketed authority, making `ACTIONS_CACHE_URL`, `ACTIONS_RUNTIME_URL` and the artifact server listener unusable. Hosts are expected bare, as documented for `cache.host`, so an address that already carries brackets is no longer accepted.
2. `cache-server` waited on its own `os.Interrupt` channel and ignored SIGTERM, so service managers and container runtimes had to kill it.
3. Task admission used a separate `Load` and `Store`, so two concurrent dispatches of the same task id could both be admitted.
Assisted-by: Claude Code:Opus 5
Co-authored-by: bircni <[email protected]>
Reviewed-on: https://gitea.com/gitea/runner/pulls/1217
Reviewed-by: bircni <[email protected]>
Co-authored-by: silverwind <[email protected]>
Revert #1136 and use actionslib instead.
revert chore: bump the module path to `/v3`, take the version from the VCS stamp (#1136)
gitea can not consume the runner's api by version while it's version mismatches the module version:
```
go: gitea.com/gitea/[email protected]: invalid version: module contains a go.mod file,
so module path must match major version ("gitea.com/gitea/runner/v3")
```
Fix that by bumping the module version now. The existing `v3.0.0` and `v3.0.1` tags stay unusable, so a new tag is needed after this lands.
Also drop the version `-X` linker flags, which would otherwise have to repeat the new path in both `Makefile` and `.goreleaser.yaml`, where a stale path makes injection silently no-op. Go has recorded the module version in the build info since 1.24, so `Version()` reads it from there, keeping the variable as an override for builds without a VCS stamp.
That part started as https://gitea.com/gitea/runner/pulls/1137 but belongs here: the stamp resolves against the tags that are legal for the module path, so without the `/v3` bump it would report `v1.0.9-0.<ts>-<sha>`. Since `release-nightly.yml` triggers on every push to `main`, splitting them would publish a nightly with a `v1` version.
---------
Co-authored-by: bircni <[email protected]>
Reviewed-on: https://gitea.com/gitea/runner/pulls/1136
Reviewed-by: techknowlogick <[email protected]>
Reviewed-by: bircni <[email protected]>
Co-authored-by: silverwind <[email protected]>
Reviewed-on: https://gitea.com/gitea/runner/pulls/1148
Reviewed-by: Zettat123 <[email protected]>
gitea can not consume the runner's api by version while it's version mismatches the module version:
```
go: gitea.com/gitea/[email protected]: invalid version: module contains a go.mod file,
so module path must match major version ("gitea.com/gitea/runner/v3")
```
Fix that by bumping the module version now. The existing `v3.0.0` and `v3.0.1` tags stay unusable, so a new tag is needed after this lands.
Also drop the version `-X` linker flags, which would otherwise have to repeat the new path in both `Makefile` and `.goreleaser.yaml`, where a stale path makes injection silently no-op. Go has recorded the module version in the build info since 1.24, so `Version()` reads it from there, keeping the variable as an override for builds without a VCS stamp.
That part started as https://gitea.com/gitea/runner/pulls/1137 but belongs here: the stamp resolves against the tags that are legal for the module path, so without the `/v3` bump it would report `v1.0.9-0.<ts>-<sha>`. Since `release-nightly.yml` triggers on every push to `main`, splitting them would publish a nightly with a `v1` version.
---------
Co-authored-by: bircni <[email protected]>
Reviewed-on: https://gitea.com/gitea/runner/pulls/1136
Reviewed-by: techknowlogick <[email protected]>
Reviewed-by: bircni <[email protected]>
Co-authored-by: silverwind <[email protected]>
Changing a setting after `generate-config` meant hand-editing YAML, which is awkward in provisioning scripts. `config` now edits an existing file in place:
```bash
./gitea-runner -c config.yaml config set runner.capacity 4
./gitea-runner -c config.yaml config set runner.envs.MY_VAR value
./gitea-runner -c config.yaml config add runner.labels 'ubuntu:docker://node:22'
./gitea-runner -c config.yaml config remove runner.labels 'ubuntu:docker://node:22'
./gitea-runner -c config.yaml config get runner.labels
```
Edits go through the YAML node tree, so comments, key order and the blank lines between top-level sections survive — a test asserts that appending a label to `config.example.yaml` changes nothing but the added line. Keys are resolved by reflecting over the `Config` struct's yaml tags, so an unknown key or a value of the wrong type is rejected before the file is touched. The write is atomic and keeps the file's symlink, owner, mode and line endings.
---------
Co-authored-by: silverwind <[email protected]>
Co-authored-by: silverwind <[email protected]>
Reviewed-on: https://gitea.com/gitea/runner/pulls/1140
Reviewed-by: silverwind <[email protected]>
Reviewed-by: Lunny Xiao <[email protected]>
Co-authored-by: bircni <[email protected]>
A batch of small, self-contained fixes and docs/example additions.
Fixes#625 - align the example config's `force_pull` with the actual default (`false`)
Fixes#804 - return an error instead of discarding `os.UserHomeDir()` when defaulting `cache.dir`/`host.workdir_parent`
Fixes#571 - send a `gitea-runner/<version>` User-Agent on API requests
Fixes#650 - detect an `Unauthenticated` fetch response and exit the daemon with an error instead of retrying forever
Fixes#766 - add `exec --eventpath` to supply a JSON event payload file
Fixes#256 - add a `bug-report` subcommand that prints version/Go/OS-arch/CPU info
Fixes#617 - add `runner.set_act_env` (default `true`) to optionally omit the `ACT=true` env var
Fixes#635 - record a failure result (and guard a nil reusable-workflow caller) when the job `if`-expression fails to evaluate
Fixes#1005 - remove README docs for config env-var overrides that were already removed from the code
Fixes#448 - clarify in `exec --job` help that `--workflows` may be needed to disambiguate
Fixes#209 - note that `host`-labelled runners still need Docker for `docker://` actions and service containers
Fixes#757 - add a systemd service example with automatic restart
Fixes#474 - add a Kubernetes StatefulSet example that persists the `.runner` registration across reschedules
Fixes#776 - build the basic (non-dind) docker image for `linux/riscv64`
Fixes#628 - build the basic (non-dind) docker image for `linux/s390x`Reviewed-on: https://gitea.com/gitea/runner/pulls/1075
Reviewed-by: Lunny Xiao <[email protected]>
Continuation of #362.
In addition to fixing merge conflicts and the `fmt.Errorf` issue from the previous version, I've also added a set of tests to cover some basic usage of `initInputs`
---------
Co-authored-by: Félix Baylac Jacqué <[email protected]>
Reviewed-on: https://gitea.com/gitea/runner/pulls/1076
Reviewed-by: Lunny Xiao <[email protected]>
Co-authored-by: h7x4 <[email protected]>
This PR
- adds the `cache-server` command so act_runner can run as a cache server. When running as a cache server, act_runner only processes the requests related to cache and does not run jobs.
- adds the `external_server` configuration for cache. If specified, act_runner will use this URL as the ACTIONS_CACHE_URL instead of starting a cache server itself.
Reviewed-on: https://gitea.com/gitea/act_runner/pulls/275
Co-authored-by: Zettat123 <[email protected]>
Co-committed-by: Zettat123 <[email protected]>
silverwind
h7x4andFélix Baylac Jacqué
silverwindandChristopherHX
Zettat123
Jason Song